 |
|
TOYO • Si-III Series • Si-IV Series • ET Series • H2 Series
|
| Unit | TM-500H2 | | Injection Unit | | Injection System | - | In-line Screw | | Injection Stroke | inch | 14.76 | | Screw diameter | inch | 2.95 | 3.27 | 3.54 | | inch | 75 | 83 | 90 | | Normal indection capacity | in³ | 101.0 | 123.7 | 145.5 | | Injection rate | High Pressure | in³/sec | 30.6 | 37.4 | 44.0 | | High Velocity | in³/sec | | Injection pressure | High Pressure | psi | 24,714 | 20,178 | 17,164 | | High Velocity | psi | | Plastication capacity | oz/sec | 2.4 | 2.9 | 3.4 | | Screw revolution | rpm
min-¹ | 10 to 162, 10 to 202 | | Nozzle pressing force | U.S.ton | 8.7 | | Hopper capacity | gal | 33.0 | | Screw drive system | - | Hydraulic motor | | Clamping Unit | | Clamping system | - | Double toggle | | Clamping force | U.S.ton | 500 | | Clamping stroke | inch | 33.50 | | Min. mold height | inch | 13.78 | | Max. mold height | inch | 36.22 | | Tie-ble clearance (HxV) | inch | 34.25 x 34.25 | | Die plate size (HxV) | inch | 43.90 x 43.90 | | Ejector force | U.S.ton | 14.7 | | Ejector stroke | inch | 7.09 | | Others | | Heater capacity | kw | 31.6 | | Pump motor | kw | 55.0 | | hp | 75 | | Mold height adjust motor | kw | 0.75 | | hp | 1 | | Oil tank capacity | gal | 171.7 | | Machine dimensions(LxWxH) | inch | 319.6x74.0x95.4 | Main breaker
capacity | 230V class | A | 400 | | 460V class | 200 | | Power source capacity | KVA | 104 | | Power cable size | 230V class | mm²
(A.W.G*1 | 150 (4/0) | | 460V class | 60 (2/0) | | Machine Weighty | U.S.ton | 23.1 |
|
|
|
|
|
|
|
| Notes: | - Figures in are for the standard-sized screw.
- The figures are subject to change without any legal obligation on the part of the manufacture.
- *1 A.W.G stands for American Wire Gauge.
|
|
|
|
|
|
|
|
|
|
