Maruka USA Inc - Metalworking machines, plastic injection molding machines, and other industrial equipment. We offer: injection, water, cooling, cooler, advance, force, diameter, pipe, stroke, speed.

BD-V4-T Series Main specifications

TOYO Plastic Injection Molding • TOYO Die Casting
Advance 1 • Advance 2 • Advance 3 • Advance 4 • Advance 5 • Specifications

Clamping unit
Model	BD-800V4-T	BD-900V4-T	BD-1200V4-T
Control system	PLCS-10
Injection system	Multi Injection System
Clamping force [kN]	7840	8826	12000
Die plate (HXW) [mm]	1400X1400	1400X1400	1800X1800
Tie-bar distance (HXW) [mm]	941X941	931X931	1150X1150
Die stroke [mm]	760	760	900
Die thickness (max,min) [mm]	950~400	950~400	1500~600
Tie-bar diameter [mm]	180	190	230
Injection
Injection force [kN]	607	688	1020
Intensify ratio	1:2.5	1:2.5	1:2.37
Plunger stroke [mm]	725	725	950
Tip jog-out strike [mm]	325	325	400
Injection position [mm]	-275(*)	-275(*)	-350
Tip diameter [mm] (standard)	80•85•90•95•100	80•90•100•110•120	100•110•120•130
Injection pressure [MPa] (Standard tip diameter)	95.4	87.6	90.2
Low injection speed [m/s]	0.03~0.70	0.03~0.70	0.05~0.70
High injection speed [m/s]	1.0~8.0	1.0~7.4	1.0~8.0
Ejection
Ejection force [kN]	342	342	586
Ejection stroke [mm]	0~125	0~125	0~200
Core
Hydraulic pressure take-out port for core (core 1.2.3) [RcXset]1	3/4X2	3/4X2	1X2
Cooling water
Cooling water inlet pipe dia [Rc]	1•1/4	1•1/4	1•1/2
Cooling water outlet pipe dia [Rc]	2•1/2	2•1/2	3
Oil cooler cooling water inlet [Rc]	1	1	1
Oil cooler cooling water outletet [Rc]	1	1	1
Die cooling adj. valve (stat.) [sizeXset]	3/8X5	3/8X7	3/8X7
Die cooling adj. valve (mov.) [sizeXset]	3/8X11	3/8X11	3/8X15
Cooling water (oil cooler) [Q/min]	100	100	100
Cooling water (die cooler) [Q/min]	150	150	150~240
Electricity
Motor (hydraulic pump) [kW]	45	45	37/22
Motor (die height) [kW]	2.2	2.2	3.7
Motor (tie bar pull-out device) [kW]	0.4	0.4	1.5
Motor (auto-matic safety door) [kW]	0.2	0.2	0.2
Motor (lubrication pump) [kW]	0.2	0.2	0.2
Power source capacity [kVA]	70	70	80
Voltage [V]	Three-phase AC200V/200, 220+-10% 50Hz/60Hz
Air
Air pipe connection port [Rc]	1•1/2	1•1/2	2
Others
Machine size (LXWXH) [mm]	9618X2813X3414	9618X2813X3414	12421X3241X4542
Machine weight [t]	42	42	71
Hydraulic oil tank capacity [Q]	750	750	1290+400

*Special injection position is available as option. The figure are subject to change without any legal obligation on the part of the manufacturer.

Some options are included.



		Maruka Direct Finance Information



		Contact Us for Machine Inquiry



		Service and Parts



		Special Offer Best condition used Injection Molding Machine for Sale

TOYO TRAINING CLASSES AVAILABLE

2012 Toyo Training
done per request

For information contact
(800) 262-7852

NPE 2012!

Use this link to register for a free Expo Pass - a value of $120 - and visit us at Booth #3315!

http://www.NPE2012GUEST.org/?e=2257

MARUKA U.S.A.
Corporate Head Office
400 Commons Way
Rockaway, NJ 07866
Phone (973) 983-1000
Fax (973) 983-8647

Email:
marukakc@marukausa.com

website design by tresware

HTML ONLY Website, Click Here.