 |
|
TOYO • Si-III Series • Si-IV Series • ET Series • H2 Series
| Injection |
|---|
| Injection system | - | in-line screw |
|---|
| Injection unit type | - | I | J | J |
|---|
| Injection stroke | in | 8.66 | 10.62 | 10.62 | 12.04 | 12.04 | 14.76 |
|---|
| Screw diameter | in (mm) | 2.16(55) | 2.36(60) | 2.67(68) | 2.36(60) | 2.67(68) | 2.95(75) | 2.67(68) | 2.957(75) | 3.26(83) |
|---|
| Theoretical injection capacity | in3 | 31.85 | 46.56 | 59.81 | 46.56 | 67.80 | 82.45 | 67.80 | 101.07 | 123.77 |
|---|
| Injection capacity (PS) | oz | 17.49 | 25.56 | 32.83 | 25.56 | 37.22 | 45.26 | 37.22 | 55.48 | 67.95 |
|---|
| Standard | | Injection unit | - | I450U | J450U | K600U |
|---|
| Injection rate | in3/s | 28.99 | 34.48 | 44.30 | 31.00 | 39.85 | 48.52 | 39.85 | 48.52 | 59.38 |
|---|
| Max. injection speed | in/s | 7.87 | 7.08 | 7.08 |
|---|
| Max. injection pressure | psi | 34114 | 28428 | 21321 | 29841 | 24164 | 19894 | 31262 | 25578 | 21315 |
|---|
| Max. injection holding pressure | psi | 28428 | 24164 | 18478 | 26999 | 21321 | 17057 | 28428 | 22736 | 18478 |
|---|
| High speed | | Injection unit | - | - | - | - |
|---|
| Injection rate | in3/s | - | - | - |
|---|
| Max. injection speed | in/s | - | - | - |
|---|
| Max. injection pressure | psi | - | - | - |
|---|
| Max. injection holding pressure | psi | - | - | - |
|---|
| Super high speed | | Injection unit | - | - | - | - |
|---|
| Injection rate | in3/s | - | - | - |
|---|
| Max. injection speed | in/s | - | - | - |
|---|
| Max. injection pressure | psi | - | - | - |
|---|
| Max. injection holding pressure | psi | - | - | - |
|---|
| - | | Recovery rate (PS) | oz/s | 2.22 | 2.37 | 3.29 | 2.06 | 2.86 | 3.78 | 2.20 | 2.91 | 3.89 |
|---|
| Screw revolution speed | min-1 | 300 | 260 | 200 |
|---|
| Nozzle pressing force | U.S. ton | 4.40 |
|---|
| Clamping |
|---|
| Clamping System | - | Double toggle |
|---|
| Clamping Force | U.S. ton | 500 |
|---|
| Clamping stroke | in | 13.49 |
|---|
| Min. mold height | in | 13.77 |
|---|
| Max. mold height | in | 35.43 |
|---|
| Tie bar clearance (HxV) | in | 36.02x36.02 |
|---|
| Die plate size (HxV) | in | 48.03x48.03 |
|---|
| Ejector force | U.S. ton | 11.0 |
|---|
| Ejector stroke | in | 7.08 |
|---|
| Others |
|---|
| Heater Capacity | kW | 16.70 | 19.50 | 24.80 | 19.50 | 24.80 | 31.20 | 24.80 | 31.20 | 38.80 |
|---|
| Mold height motor output | kW | 0.75 |
|---|
| Nozzle touch motor output | kW | 0.4 |
|---|
| Machine dimension (L) | in | 280.94 | 286.61 | 296.69 | 293.11 | 299.72 | 312.08 | 326.14 | 335.23 | 342.08 |
|---|
| Machine dimension (WxH) | in | 72.55x90.96 |
|---|
| Power Source | - | Three-phase AC200V/200,220V±10% 50Hz/60Hz |
|---|
Main breaker capacity:200V [400V 1] | A | 400 [200] |
|---|
| Total electric capacity | kVA | 71 | 75 | 98 |
|---|
| Cable size: 200V Class [400V Class1] | in2 | 0.15[0.05] | 0.23[0.09] |
|---|
| Machine weight | U.S. ton | 25.3 | 25.3 | 26.4 |
|---|
|
|
|
|
|
|
|
|
