 |
|
TOYO • Si-III Series • Si-IV Series • ET Series • H2 Series
| Injection |
|---|
| Injection system | - | in-line screw |
|---|
| Injection unit type | - | H | I |
|---|
| Injection stroke | in | 7.87 | 8.66 | 8.66 | 10.62 |
|---|
| Screw diameter | in (mm) | 1.96(50) | 2.16(55) | 2.36(60) | 2.16(55) | 2.36(60) | 2.67(68) |
|---|
| Theoretical injection capacity | in3 | 23.98 | 31.85 | 37.96 | 31.85 | 46.56 | 59.81 |
|---|
| Injection capacity (PS) | oz | 13.16 | 17.49 | 19.78 | 17.49 | 25.56 | 32.83 |
|---|
| Standard | | Injection unit | - | H370U | I450U |
|---|
| Injection rate | in3/s | 23.98 | 28.99 | 34.48 | 28.99 | 34.48 | 44.30 |
|---|
| Max. injection speed | in/s | 7.87 | 7.87 |
|---|
| Max. injection pressure | psi | 34085 | 28428 | 24164 | 34114 | 28428 | 21321 |
|---|
| Max. injection holding pressure | psi | 31271 | 25585 | 21321 | 28428 | 24164 | 18478 |
|---|
| High speed | | Injection unit | - | - | - |
|---|
| Injection rate | in3/s | - | - |
|---|
| Max. injection speed | in/s | - | - |
|---|
| Max. injection pressure | psi | - | - |
|---|
| Max. injection holding pressure | psi | - | - |
|---|
| Super high speed | | Injection unit | - | - | - |
|---|
| Injection rate | in3/s | - | - |
|---|
| Max. injection speed | in/s | - | - |
|---|
| Max. injection pressure | psi | - | - |
|---|
| Max. injection holding pressure | psi | - | - |
|---|
| - | | Recovery rate (PS) | oz/s | 1.96 | 2.22 | 2.37 | 2.22 | 2.37 | 3.29 |
|---|
| Screw revolution speed | min-1 | 300 |
|---|
| Nozzle pressing force | U.S. ton | 3.30 | 4.40 |
|---|
| Clamping |
|---|
| Clamping System | - | Double toggle |
|---|
| Clamping Force | U.S. ton | 300 |
|---|
| Clamping stroke | in | 22.83 |
|---|
| Min. mold height | in | 9.84 |
|---|
| Max. mold height | in | 27.55 |
|---|
| Tie bar clearance (HxV) | in | 28.74x28.74 |
|---|
| Die plate size (HxV) | in | 37.00x37.00 |
|---|
| Ejector force | U.S. ton | 7.92 |
|---|
| Ejector stroke | in | 5.51 |
|---|
| Others |
|---|
| Heater Capacity | kW | 13.50 | 16.70 | 19.50 | 16.70 | 19.50 | 24.80 |
|---|
| Mold height motor output | kW | 0.4 |
|---|
| Nozzle touch motor output | kW | 0.4 |
|---|
| Machine dimension (L) | in | 252.12 | 254.84 | 261.61 | 266.18 | 271.85 | 281.92 |
|---|
| Machine dimension (WxH) | in | 62.24x85.90 |
|---|
| Power Source | - | Three-phase AC200V/200,220V±10% 50Hz/60Hz |
|---|
Main breaker capacity:200V [400V 1] | A | 300 |
|---|
| Total electric capacity | kVA | 56 | 58 | 60 | 65 | 67 | 71 |
|---|
| Cable size: 200V Class [400V Class1] | in2 | 0.15[0.05] |
|---|
| Machine weight | U.S. ton | 19.25 | 19.80 |
|---|
|
|
|
|
|
|
|
|
