 |
|
TOYO • Si-III Series • Si-IV Series • ET Series • H2 Series
| | Unit | TM-300H2 | | Injection Unit | | Injection System | - | In-line Screw | | Injection Stroke | inch | 10.63 | | Screw diameter | inch | 2.36 | 2.68 | 2.95 | | inch | 60 | 68 | 75 | | Normal indection capacity | in³ | 46.6 | 59.8 | 72.6 | | Injection rate | High Pressure | in³/sec | 18.4 | 23.7 | 28.8 | | High Velocity | in³/sec | | Injection pressure | High Pressure | psi | 26,847 | 20,903 | 17,178 | | High Velocity | psi | | Plastication capacity | oz/sec | 1.9 | 2.4 | 2.9 | | Screw revolution | rpm
min-¹ | 10 to 181, 10 to 257 | | Nozzle pressing force | U.S.ton | 8.7 | | Hopper capacity | gal | 33.0 | | Screw drive system | - | Hydraulic motor | | Clamping Unit | | Clamping system | - | Double toggle | | Clamping force | U.S.ton | 300 | | Clamping stroke | inch | 22.83 | | Min. mold height | inch | 9.84 | | Max. mold height | inch | 24.60 | | Tie-ble clearance (HxV) | inch | 28.74 x 28.74 | | Die plate size (HxV) | inch | 37.00 x 37.00 | | Ejector force | U.S.ton | 8.3 | | Ejector stroke | inch | 5.51 | | Others | | Heater capacity | kw | 19.2 | | Pump motor | kw | 37.0 | | hp | 50 | | Mold height adjust motor | kw | 0.4 | | hp | 1/2 | | Oil tank capacity | gal | 118.9 | | Machine dimensions(LxWxH) | inch | 260.0x68.3x87.8 | Main breaker
capacity | 230V class | A | 225 | | 460V class | 125 | | Power source capacity | KVA | 68 | | Power cable size | 230V class | mm²
(A.W.G*1 | 60 (2/0) | | 460V class | 22 (4) | | Machine Weighty | U.S.ton | 14.3 | | | | | | |
|
| Notes: | - Figures in are for the standard-sized screw.
- The figures are subject to change without any legal obligation on the part of the manufacture.
- *1 A.W.G stands for American Wire Gauge.
|
|
|
|
|
|
|
|
|
|
