 |
|
TOYO Si-III Series Si-IV Series ET Series H2 Series
| Injection |
|---|
| Injection system | - | in-line screw | | Injection stroke | in | 5.79 | | Screw diameter | in (mm) | 1.10(28) | | Theoretical injection capacity | in3 | 5.5 | | Injection injection capacity (PS) | oz | 2.99 | | Injection rate | in3/s | 11.2 | | Max. injection speed | in/s | 11.8 | | Max. injection pressure | psi | 34113 | | Max. injection holding pressure | psi | 28428 | | Recovery rate (PS) | oz/s | 0.4 | | Screw revolution speed | min-1 | 350 | | Nozzle pressing force | U.S. ton | 1.1 | | Clamping |
|---|
| Clamping System | - | Toggle | | Clamping Force | U.S. ton | 90 | | Clamping stroke | in | 11.02 | | Min. mold height | in | 5.91 | | Max. mold height | in | 13.78 | | Max. die plate size (HxV) | in | 12.80x12.80 15.75x11.81 | | Max. lower mold-half weight | lb | 560x2 pcs | | Table Diameter | in | 44.88 | | Ejector force | U.S. ton | 2.8 | | Ejector stroke | in | 2.56 | | Others |
|---|
| Heater Capacity | kW | 5.50 | | Mold height motor output | kW | 0.4[0.4x3] | | Nozzle touch motor output | kW | 0.75 | | Machine dimension (WxHxL) | in | 48.82x87.80x125.12 | | Power Source | - | Three-phase AC200V/200. 220V+-10% 50Hz/60Hz | | Main breaker capacity | A | 125[75] | | Total electric capacity | kVA | 20 | Cable size: 200V Class [400V Class  1] | in2 | 0.03[0.02] | | Machine weight | U.S. ton | 5.0 |
|
|
|
|
|
|
|
|
