 |
|
TOYO Si-III Series Si-IV Series ET Series H2 Series
| Injection |
|---|
| Injection system | - | in-line screw | | Injection stroke | in | 5.12 | | Screw diameter | in (mm) | 0.94(24) | | Theoretical injection capacity | in3 | 3.60 | | Injection injection capacity (PS) | oz | 1.96 | | Injection rate | in3/s | 8.24 | | Max. injection speed | in/s | 11.81 | | Max. injection pressure | psi | 34104 | | Max. injection holding pressure | psi | 28420 | | Recovery rate (PS) | oz/s | 0.95 | | Screw revolution speed | min-1 | 500 | | Nozzle pressing force | U.S. ton | 1.1 | | Clamping |
|---|
| Clamping System | - | Toggle | | Clamping Force | U.S. ton | 45 | | Clamping stroke | in | 9.84 | | Min. mold height | in | 5.94 | | Max. mold height | in | 11.81 | | Max. die plate size (HxV) | in | 11.81x11.81 13.78x10.83 | | Max. lower mold-half weight | lb | 379x2 pcs | | Table Diameter | in | 40.94 | | Ejector force | U.S. ton | 2.2 | | Ejector stroke | in | 1.57 | | Others |
|---|
| Heater Capacity | kW | 3.45 | | Mold height motor output | kW | 0.2[0.2x3] | | Nozzle touch motor output | kW | 0.2 | | Machine dimension (WxHxL) | in | 48.82x88.86x114.33 | | Power Source | - | Three-phase AC200V/200. 220V+-10% 50Hz/80Hz | | Main breaker capacity | A | 75 | | Total electric capacity | kVA | 11 | Cable size: 200V Class [400V Class  1] | in2 | 0.02[0.01] | | Machine weight | U.S. ton | 4.2 |
|
|
|
|
|
|
|
|
