SP-40ST
SP-60ST
SP-80ST
SP-90ST
SP-120ST
SP-125ST
SP-6SL
SP-8SST
SP-15ST
SP-25ST
SP-40ST
SP-60ST
Specs PDF
| | RC Series Pipe Cutters | | RC Pipe Cutters | RC-20SC | RC-20NC/25NC | RC-25NCD/NSD | | Processing method | Spin Cutter Type (with pull function) | | Work setting method | Coil Material quick-over change type/RC-25 straight type | | Material | Copper pipe, Aluminum pipe, dual winding pipe, steel pipe | | Available diameter | ø6.35~22.22 | ø6.35~22.22 | | Cutting length | 100mm~9,000mm
(Step-wise feed if the length is 1,000 mm or longer) | 100mm~10,000mm
(Step-wise feed if the length is 1,000 mm or longer) | | Cutting accuracy | ±0.2mm/±0.3mm | ±0.2mm/±0.3mm | | Cutting unit | 1 piece 1pc | | Cycle time (Reference) | 100mm:1.5 ~4.0sec | 100mm:within 4.0 sec | 100mm:Cutting/ 3.0~4.0sec | | 500mm:2.0 ~6.0sec | 500mm:within 6.0 sec | 100mm:Deburring/ 6~10sec | | 1,000mm:3.0 ~8.0sec | | 500mm:Cutting/ 6.0sec | | 2,000mm:5.5 ~11.0sec | | 500mmDeburring/ 7~11sec | | Primary power source | AC200V 50/60Hz | | Secondary power source for operation | AC200VÅE AC100V/50/60Hz,DC24V | | Control method | Hydraulic / pneumatic solenoid valve control by Seguencer | Hydraulic / pneumatic solenoid valve control feed by micro-computerized NC | | Motor | Feed motor | - | 0.98kw (AC Servo-motor) | | Cutter motor | 0.75kw /unit | | Hydraulic motor | 1.5kw /unit | | Hydraulic unit | Deburring Motor | - | 0.2kw /2 units | | Operation | 25~35Kg/cm2 | 25~35Kg/cm2 | | Discharge | 20Å`25 l/min | | Tank cap | 20 liter | | Pneumatic source | Pressure | 4Kg/cm2 | | Consumption | 1000 liter/min | 300 liter/min | | Weight (main unit) | 1200kg/1500kg | 1500kg/1800kg |
|
|
){kind=link}