 |
|
TOYO • Si-III Series • Si-IV Series • ET Series • H2 Series
| | Unit | TM-200H2 | | Injection Unit | | Injection System | - | In-line Screw | | Injection Stroke | inch | 7.87 | | Screw diameter | inch | 1.81 | 1.97 | 2.17 | | inch | 46 | 50 | 55 | | Normal indection capacity | in³ | 20.3 | 24.0 | 29.0 | | Injection rate | High Pressure | in³/sec | 9.3 | 11.0 | 13.2 | | High Velocity | in³/sec | | Injection pressure | High Pressure | psi | 31,995 | 27,075 | 22,382 | | High Velocity | psi | | Plastication capacity | oz/sec | 1.1 | 1.5 | 1.9 | | Screw revolution | rpm
min-¹ | 10 to 199, 10 to 285 | | Nozzle pressing force | U.S.ton | 6.3 | | Hopper capacity | gal | 14.5 | | Screw drive system | - | Hydraulic motor | | Clamping Unit | | Clamping system | - | Double toggle | | Clamping force | U.S.ton | 200 | | Clamping stroke | inch | 18.5 | | Min. mold height | inch | 7.87 | | Max. mold height | inch | 19.69 | | Tie-ble clearance (HxV) | inch | 22.05 x 22.05 | | Die plate size (HxV) | inch | 30.71 x 30.71 | | Ejector force | U.S.ton | 6.2 | | Ejector stroke | inch | 4.72 | | Others | | Heater capacity | kw | 11.2 | | Pump motor | kw | 22.0 | | hp | 30 | | Mold height adjust motor | kw | 0.2 | | hp | 1/4 | | Oil tank capacity | gal | 52.8 | | Machine dimensions(LxWxH) | inch | 211.7x50.4x78.0 | Main breaker
capacity | 230V class | A | 225 | | 460V class | 125 | | Power source capacity | KVA | 42 | | Power cable size | 230V class | mm²
(A.W.G*1 | 60 (2/0) | | 460V class | 22 (4) | | Machine Weighty | U.S.ton | 7.7 | | | | | | |
|
| Notes: | - Figures in are for the standard-sized screw.
- The figures are subject to change without any legal obligation on the part of the manufacture.
- *1 A.W.G stands for American Wire Gauge.
|
|
|
|
|
|
|
|
|
|
