 |
|
TOYO • Si-III Series • Si-IV Series • ET Series • H2 Series
| | Unit | TT-150HR2 | | Injection Unit | | Injection System | - | In-line Screw | | Injection Stroke | inch | 6.3 | | Screw diameter | inch | 1.57 | 1.81 | | Normal indection capacity | in³ | 12.2 | 16.2 | | * Injection capacity (ps) | oz | 6.7 | 8.8 | | Injection rate | High Pressure | in³/sec | 9.0 | 12.0 | | High Velocity | in³/sec | - | - | | Injection pressure | High Pressure | psi | 27,971 | 21,145 | | High Velocity | psi | - | - | | Recovery Rates | oz/sec | 0.8 | 1.1 | | Screw revolution | rpm | 15 to 285 | | Nozzle pressing force | U.S.ton | 2.5 | | Hopper capacity | gal | 14.5 | | Screw drive system | - | Hydraulic motor | | Clamping Unit | | Number of Stations | - | 2[180º-REVERSIBLE] | | Clamping system | - | Vertically moving hydraulic system | | Clamping force | U.S.ton | 150 | | Opening force | | 9.3 | | Clamping stroke | inch | 11.02 | | Min. mold height | inch | 9.84 | | Daylight | inch | 20.87 | | Table diameter | inch | 54.53 | | Ejector force | U.S.ton | 4.5 [3-point ejecting] | | Ejector stroke | inch | 2.95 | | Rotory table height | inch | 47.05 | | Nozzle center height | inch | 5.9 [from table surface] | | Max lower mold-half weight | lb | 705 x 2 pcs | | Others | | Heater capacity | kw | 8.65 | | Pump motor | kw | 18.5 | | Oil tank capacity | gal | 60.8 | | Machine dimensions(LxWxH) | inch | 157x78.5x92 | | Machine Weight | U.S.ton | 7.3 | | | | | |
|
| Notes: | - Figures in are optional.
- The specifications are subject to change without any legal obligation on the part of the manufacture.
- The figures marked (*) vary according to molding conditions.
|
|
|
|
|
|
|
|
|
|
