 |
|
TOYO • Si-III Series • Si-IV Series • ET Series • H2 Series
|
| Unit | TM-110H2 | | Injection Unit | | Injection System | - | In-line Screw | | Injection Stroke | inch | 5.70 | | Screw diameter | inch | 1.26 | 1.42 | 1.57 | | inch | 32 | 36 | 40 | | Normal indection capacity | in³ | 7.1 | 9.0 | 11.1 | | Injection rate | High Pressure | in³/sec | 6.7 | 8.4 | 10.4 | | High Velocity | in³/sec | | Injection pressure | High Pressure | psi | 34,128 | 29,748 | 24,088 | | High Velocity | psi | | Plastication capacity | oz/sec | 0.5 | 0.6 | 0.7 | | Screw revolution | rpm
min-¹ | 10 to 320 | | Nozzle pressing force | U.S.ton | 6.3 | | Hopper capacity | gal | 10.6 | | Screw drive system | - | Hydraulic motor | | Clamping Unit | | Clamping system | - | Double toggle | | Clamping force | U.S.ton | 110 | | Clamping stroke | inch | 14.17 | | Min. mold height | inch | 5.91 | | Max. mold height | inch | 16.93 | | Tie-ble clearance (HxV) | inch | 16.14 x 16.14 | | Die plate size (HxV) | inch | 22.83 x 22.83 | | Ejector force | U.S.ton | 4.5 | | Ejector stroke | inch | 3.15 | | Others | | Heater capacity | kw | 6.15 | | Pump motor | kw | 18.5 | | hp | 25 | | Mold height adjust motor | kw | 0.2 | | hp | 1/4 | | Oil tank capacity | gal | 42.3 | | Machine dimensions(LxWxH) | inch | 167.3x42.4x72.7 | Main breaker
capacity | 230V class | A | 200 | | 460V class | 75 | | Power source capacity | KVA | 32 | | Power cable size | 230V class | mm²
(A.W.G*1 | 60 (2/0) | | 460V class | 22 (4) | | Machine Weighty | U.S.ton | 5.2 |
|
|
|
|
|
|
|
| Notes: | - Figures in blue are for the standard-sized screw.
- The figures are subject to change without any legal obligation on the part of the manufacture.
- *1 A.W.G stands for American Wire Gauge.
|
|
|
|
|
|
|
|
|
|
