 |
|
TOYO • Si-III Series • Si-IV Series • ET Series • TT Series
|
| Unit | TT-90HR2 | | Injection Unit | | Injection System | - | In-line Screw | | Injection Stroke | inch | 5.118 | | Screw diameter | inch | 1.26 | 1.42 | 1.57 | | Normal indection capacity | in³ | 6.3 | 8.1 | 9.9 | | * Injection capacity (ps) | oz | 3.5 | 4.4 | 5.5 | | Injection rate | High Pressure | in³/sec | 6.7 | 8.4 | 10.4 | | High Velocity | in³/sec | 7.4 | 9.3 | 11.5 | | Injection pressure | High Pressure | psi | 34,128 | 29,748 | 24,088 | | High Velocity | psi | 33,886 | 26,776 | 21,686 | | Recovery Rates | oz/sec | 0.5 | 0.6 | 0.7 | | Screw revolution | rpm | 10 to 320 | | Nozzle pressing force | U.S.ton | 2 | | Hopper capacity | gal | 10.6 | | Screw drive system | - | Hydraulic motor | | Clamping Unit | | Number of Stations | - | 2[180º-REVERSIBLE] | | Clamping system | - | Vertically moving hydraulic system | | Clamping force | U.S.ton | 90 | | Opening force |
| 7.5 | | Clamping stroke | inch | 9.84 | | Min. mold height | inch | 7.87 | | Daylight | inch | 17.71 | | Table diameter | inch | 48.03 | | Ejector force | U.S.ton | 4.5 [3-point ejecting] | | Ejector stroke | inch | 2.00 | | Rotory table height | inch | 41.34 | | Nozzle center height | inch | 5.2 [from table surface] | | Max lower mold-half weight | lb | 440 x 2 pcs | | Others | | Heater capacity | kw | 7.3 | | Pump motor | kw | 18.5 | | Oil tank capacity | gal | 48.8 | | Machine dimensions(LxWxH) | inch | 133x58.3x83.5 | | Machine Weight | U.S.ton | 5.7 |
|
|
|
|
|
|
|
| Notes: | - Figures in are optional.
- The specifications are subject to change without any legal obligation on the part of the manufacture.
- The figures marked (*) vary according to molding conditions.
|
|
|
|
|
|
|
|
|
|
