 |
|
TOYO • Si-III Series • Si-IV Series • ET Series • H2 Series
| | Unit | TT-55HR2 | | Injection Unit | | Injection System | - | In-line Screw | | Injection Stroke | inch | 3.937 | | Screw diameter | inch | 1.10 | 1.26 | 1.42 | | Normal indection capacity | in³ | 3.7 | 4.9 | 6.2 | | * Injection capacity (ps) | oz | 2.0 | 2.7 | 3.4 | | Injection rate | High Pressure | in³/sec | 5.4 | 7.1 | 9.0 | | High Velocity | in³/sec | 6.3 | 8.3 | 10.5 | | Injection pressure | High Pressure | psi | 34,128 | 28,767 | 22,667 | | High Velocity | psi | 31,938 | 24,458 | 19,325 | | Recovery Rates | oz/sec | 0.4 | 0.5 | 0.7 | | Screw revolution | rpm | 10 to 350 | | Nozzle pressing force | U.S.ton | 2 | | Hopper capacity | gal | 10.6 | | Screw drive system | - | Hydraulic motor | | Clamping Unit | | Number of Stations | - | 2[180º-REVERSIBLE] | | Clamping system | - | Vertically moving hydraulic system | | Clamping force | U.S.ton | 55 | | Opening force | | 5.9 | | Clamping stroke | inch | 9.84 | | Min. mold height | inch | 7.87 | | Daylight | inch | 17.71 | | Table diameter | inch | 43.3 | | Ejector force | U.S.ton | 3.5 [3-point ejecting] | | Ejector stroke | inch | 2.00 | | Rotory table height | inch | 40.16 | | Nozzle center height | inch | 5.2 [from table surface] | | Max lower mold-half weight | lb | 295 x 2 pcs | | Others | | Heater capacity | kw | 5.8 | | Pump motor | kw | 15.0 | | Oil tank capacity | gal | 48.8 | | Machine dimensions(LxWxH) | inch | 125.3x53.6x79 | | Machine Weight | U.S.ton | 4.2 | | | | | | |
|
| Notes: | - Figures in are optional.
- The specifications are subject to change without any legal obligation on the part of the manufacture.
- The figures marked (*) vary according to molding conditions.
|
|
|
|
|
|
|
|
|
|
