 |
|
TOYO • Si-III Series • Si-IV Series • ET Series • H2 Series
| | Unit | Si-200II | | Injection | | System | - | In-line Screw | | Injection unit | - | H300U | | Injection Stroke | inch | 7.87 | | Screw diameter | inch | 1.81 | 1.97 | 2.17 | | mm | 46 | 50 | 55 | | Normal indection capacity | in³ | 20.12 | 23.89 | 28.93 | | * Injection capacity | oz | 11.1 | 13.1 | 15.9 | | Injection rate | in³/sec | 21.28 | 25.15 | 30.37 | | Max. Injection speed | in/sec | 8.27 | 8.27 | 8.27 | | Max. Injection pressure | psi | 31,284 | 27,018 | 22,752 | | Max. holding pressure | psi | 28,440 | 24,174 | 19,908 | | Screw revolution | rpm | up to 300 | | Nozzle pressing force | U.S.ton | 2.75 | | Hopper capacity | gal | 14.56 | | Clamping Unit | | Clamping system | - | Double toggle | | Clamping force | U.S.ton | 200 | | Clamping stroke | inch | 18.50 | | Min. mold height | inch | 7.87 | | Max. mold height | inch | 23.6 | | Tie-ble clearance (HxV) | inch | 22.05 x 22.05 | | Die plate size (HxV) | inch | 30.71 x 30.71 | | Ejecting force | U.S.ton | 3.9 | | Ejecting stroke | inch | 4.72 | | Others | | Heater capacity | kw | 12.7 | | Machine dimensions(LxWxH) | inch | 224.7x51.61x68.90 | | Machine Weight | U.S.ton | 8.03 | | Electric capacity | KVA | 37 | | Optional Injection unit | | H200AU
H200BU | | | | | |
|
| Notes: | - * mark figure varies depending on molding conditions.
- Figures in are optional.
- The applicable max.injection pressure and holding pressure will be restricted according to the material in the real molding operation.
- The figures for the max.injection rate and the max.injection speed are calculated ones. The actual injection rate and injection speed will be restricted by pressure. Actual stting pressure may be restricted by molding conditions and cycle time. The figures are subject to change without any legal obligation on the part of the manufacture.
- A large-sized screw may not be applicable to some kind of material.
- Input power: 3-phase AC230V±10%.
- Electric capacity is for the machine with a standard injection unit.
|
|
|
|
|
|
|
|
|
|
